17 Kasım 2019 | Pazar
 

SCI Kapsamlı Yayın Bilgileri:

BilgiAtıfDosya
1) "Optimization of Surface Properties of Shot Peened Ti6Al4V Alloy", Yıldıran Yasemin, Avcu Egemen, Sınmazçelik Tamer, Acta Physica Polonica A, 127, 984-986, (2015)
Tez:
0-
2) "Thermomechanical and Solid Particle Erosion Behaviour of CaCO3 and SGF (Short Glass Fibre) Reinforced ABS/PA6 Composites", Alp Eren ŞAHİN, Sinan YILMAZ, Taner Yılmaz, Tamer SINMAZÇELİK, ACTA PHYSICA POLONICA A, 127, 1062-1064, (2015)
Tez:
0-
3) "Comparison of the mechanical, thermomechanical, thermal, and morphological properties of pumice and calcium carbonate-filled poly(phenylene sulphide) composites", Alp Eren ŞAHİN, Nevin Gamze KARSLI, Tamer SINMAZÇELİK, Polymer Composites, , , (2015)
Tez:
0-
4) "THE INFLUENCE OF DIFFERENT CIRCULAR HOLE PERFORATIONS ON INTERLAMINAR SHEAR STRENGTH OF A NOVEL FIBRE METAL LAMINATES", Mustafa Özgür Bora, Onur Çoban, Tamer Sınmazçelik, İsmail Cürgül, Polymer Composites,, Basım aşamasında, DOI: 10.1002/pc.23256, , (2015)
Tez:
0-
5) "The influences of the particle impingement angle and velocity on surface roughness, erosion rate and 3D surface morphology of the solid particle eroded Ti6Al4V alloy", Avcu Egemen, Yıldıran Yasemin, Şahin Alp Eren, Fidan Sinan, Sinmazçelik Tamer, Acta Physica Polonica A, 125, 541-543, (2014)
Tez:
0-
6) "Mechanical and Thermal Properties of Pumice Powder Filled PPS Composites", Alp Eren ŞAHİN, Yasemin YILDIRAN, Egemen AVCU, Sinan FİDAN, Tamer SINMAZÇELİK, ACTA PHYSICA POLONICA A, 125, 518-520, (2014)
Tez:
0-
7) "Solid Particle Erosive Wear Behavior of Glass Mat Reinforced PPS Composites: Influence of Erodent Particle Size, Pressure, Particle Impingement Angle, and Velocity ", Avcu, Egemen; Fidan, Sinan; Bora, Mustafa Ozgur; et al., ADVANCES IN POLYMER TECHNOLOGY, 32, E386-E398, (2013)
Tez:
0-
8) "A Study on the Derivation of Parametric Cutting Force Equations in Drilling of GFRP Composites ", Okutan, E ; Karabay, S; Sinmazcelik, T ; Avcu, E , STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 59-2, 97-105, (2013)
Tez:
0-
9) "THE COMPARISON OF SOLID PARTICLE EROSION BEHAVIORS OF AA-1070 AND AA-6101 ALLOYS USED INPOWER TRANSMISSION LINES IN TURKEY ", Avcu, Egemen; Fidan, Sinan; Karabay, Sedat; Sinmazcelik, Tamer, JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 27-4, 865-874 , (2013)
Tez:
0-
10) "Internal damage investigation of the impacted glass/glass plus aramid fiber reinforced composites by micro-computerized tomography ", Fidan, Sinan; Sinmazcelik, Tamer; Avcu, Egemen, NDT & E INTERNATIONAL, 51, 1-7, (2013)
Tez:
0-
11) "The Influence of Annealing on the Crystallization and Tribological Behavior of MWNT/PEEK Nanocomposites ", Coban, Onur; Bora, Mustafa Ozgur; Avcu, Egemen, Sinmazcelik, Tamer, POLYMER COMPOSITES, 32-11, 1766-1771 , (2013)
Tez:
0-
12) "A review: Fibre metal laminates, background, bonding types and applied test methods", Sinmazcelik, Tamer; Avcu, Egemen; Bora, Mustafa Ozgur;Çoban, Onur, MATERIALS & DESIGN, 32-7, 3671-3685, (2013)
Tez:
0-
13) "Erosive Wear Studies of Glass fiber- and Carbon Fiber-reinforced Polyetheretherketone Composites at Low Particle Speed ", Sari, Nejat Y.; Sinmazcelik, Tamer; Yilmaz, Taner, JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 24-3, 333-350, (2013)
Tez:
0-
14) "Fracture Behavior of High Impact Polystyrene under Different Impact Energies ", Sahin, T.; Yilmaz, T.; Sinmazcelik, T., KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 63, 291-295, (2013)
Tez:
0-
15) "Bearing strength of polyphenylene sulphide (PPS) composites.", Sinmazcelik, T., ABSTR PAP AM CHEM S , 223, 122, (2009)
Tez:
0-
16) "On the life time prediction of repeatedly impacted thermoplastic matrix composites ", Bora MO, Coban O, Sinmazcelik T, Curgul I, Gunay V, MATERIALS & DESIGN, 30, 145-153, (2009)
Tez:
1-
17) "Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites ", Coban O, Bora MO , Sinmazcelik T, Curgul I, Gunay V, MATERIALS & DESIGN, 30, 628-634, (2009)
Tez:
2-
18) "Characterization of the drilling alumina ceramic using Nd:YAG pulsed laser ", Kacar E, Mutlu M, Akman E, Demir A, Candan L, Canel T , Gunay V, Sinmazcelik T , JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , 209, 2008-2014 , (2009)
Tez:
1-
19) "Laser welding of Ti6Al4V titanium alloys ", Akman E, Demir A , Canel T, Sinmazcelik T , JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , 209, 3705-3713 , (2009)
Tez:
0-
20) "Fracture characteristics of high impact polystyrene under impact fatigue loadings ", Yilmaz T, Sahin T, Sinmazcelik T , JOURNAL OF MATERIALS SCIENCE, 44, 4308-4314 , (2009)
Tez:
0-
21) "Effects of Geometric Parameters on the Pin-bearing Strength of Glass/Polyphenylenesulphide Composites ", Yilmaz T, Sinmazcelik T , JOURNAL OF COMPOSITE MATERIALS , 43, 2239-2253, (2009)
Tez: Sürekli karbon fiber takviyeli kompozitlerde pim ile yük taşıma performansının incelenmesi
0-
22) "Residual mechanical properties of carbon/polyphenylenesulphide composites after solid particle erosion", Sinmazcelik T, Fidan S, Gunay V, MATERIALS & DESIGN, 29, 1419-1426, (2008)
Tez:
0-
23) "The effects of thermal cycles on the impact fatigue properties of thermoplastic matrix composites ", Sinmazcelik T, Coban O, Bora MO, Gunay V, Curgul I, APPLIED COMPOSITE MATERIALS , 15, 99-113 , (2008)
Tez:
0-
24) "Effect of insertional temperature on the pullout strength of pedicle screws inserted into thoracic vertebrae - An in vitro calf study ", Tosun B, Sinmazcelik T , Buluc L, Curgul I, Sarlak AY, SPINE , 33, E667-E672, (2008)
Tez:
0-
25) "Erosive wear behaviour of carbon fibre/polyetherimide composites under low particle speed", Nejat Sarı, Tamer Sınmazçelik, MATERIALS & DESIGN, 28, 351-355, (2007)
Tez:
0-
26) "Investigation of load bearing performances of pin connected carbon/ polyphenylene sulphide composites under static loading conditions", Taner Yılmaz, Tamer Sınmazçelik, MATERIALS & DESIGN, 28, 520-527, (2007)
Tez:
2-
27) "Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites", Tamer Sınmazçelik , Taner Yılmaz, MATERIALS & DESIGN, 28, 641-648, (2007)
Tez:
1-
28) "Geometric parameters and chemical corrosion effects on bearing strength of polyphenylenesulphide (PPS) composites", Taner Yılmaz, Tamer Sınmazçelik, MATERIALS & DESIGN, 28, 1695-1698, (2007)
Tez:
0-
29) "The effect of natural weathering on the mechanical, morphological and thermal properties of high impact polystyrene (HIPS)", Tülin Şahin, Tamer Sınmazçelik, Şenol Şahin, MATERIALS & DESIGN, 28, 2303-2309, (2007)
Tez:
1-
30) "Erosive wear behaviour of polyphenylenesulphide (PPS) composites", Tamer Sınmazçelik, İsa Taşkıran, MATERIALS & DESIGN, 28, 2471-2477, (2007)
Tez:
0-
31) "Optimization of Nd:YAG Laser Welding of Magnesium ", Demir A, Akman E , Canel T , Erturk S , Kaya AA , Kenar N , Sinmazcelik T , Urhan O , JOURNAL OF LASER MICRO NANOENGINEERING, 2, 108-113, (2007)
Tez:
0-
32) "Progresses on the theoretical and experimental studies in Laser Technologies Research and Application Center in Kocaeli ", Akman E, Atalay B , Candan L, Canel T, Demir A, Demir P, Erturk S, Genc B, Kacar E , Kenar N, Koymen E, Mutlu M, Sinmazcelik T, Urhan O, AIP CONFERENCE PROCEEDINGS , 899, 331-332 , (2007)
Tez:
0-
33) "Optimizatin of pulsed Nd : YAG laser parameters for titanium seam-welding ", Akman E, Canel T , Demir A, Sinmazcelik T , AIP CONFERENCE PROCEEDINGS , 899, 303-304 , (2007)
Tez:
1-
34) "Impact-Fatigue behaviour of unidirectional carbon fibre reinforced polyetherimide (PEI) composites", Sınmazçelik, T., Arıcı A., Günay V., J Mater Sci, 41, 6237–6244, (2006)
Tez:
5-
35) "Influence of various fluids on the interlaminar shear strength (ILLS) and impact behaviour of carbon/PEI composites", Sınmazcelik, T., Arıcı, A., Journal of Materials Science, 41, 3255–3262, (2006)
Tez:
0-
36) "Thermal cycles effects on interlaminar shear strength (ILSS) and impact behaviour of carbon/PEI composites", Sınmazcelik, T., Arıcı, A., Journal of Materials Science, 41, 1233-1241, (2006)
Tez:
6-
37) "Natural weathering effects on the mechanical and surface properties of polyphenylene sulphide (PPS) composites ", Sınmazçelik, T. , Materials & Design, 27, 270-277, (2006)
Tez:
6-
38) "Effects of double passes of the tool on friction stir welding of polyethylene", Arıcı, A., Sınmazçelik, T. , Journal of Materials Science , 40, 3313-3316, (2005)
Tez:
2-
39) "Influence of annealing on the performance of short glass fibre reinforced polyphenylene sulfide (PPS) composites", Arıcı, A., Sınmazçelik, T., Çapan, L., Yılgör, İ., Yılgör, E, Journal of Composite Materials, 39, 21-33, (2005)
Tez:
0-
40) "Evaluation of cyanoacrylate augmentation of transpedicular screw pull out strength", Milcan, A., Ayan, İ., Zeren,A., Sınmazcelik, T., Yılmaz,A., Zeren, Z., Journal of Spinal Disorders and Techniques, 18, 511-514, (2005)
Tez:
1-
41) "Investigation about the effect of previous impacts on the impact behavior of high impact polystyrene (HIPS)", Şahin, T., Sınmazçelik, T., Journal of Materials Science , 39, 2543-2546, (2004)
Tez: Polistiren malzemenin çevresel etkiler ve fiziksel yaşlandırma etkisinde değişen mikro yapı-mekanik özellikler ilişkisi
0-
42) "Mechanical, thermomechanical and tribological properties of cold drawn high impact PS", Sinmazcelik, T., Sahin, T., ABSTR PAP AM CHEM, 224, 208, (2002)
Tez: Polistiren malzemenin çevresel etkiler ve fiziksel yaşlandırma etkisinde değişen mikro yapı-mekanik özellikler ilişkisi
0-
43) "Thermal aging effects on mechanical properties of PEEK and PEEK composites", Sinmazcelik, T., ABSTR PAP AM CHEM , 223, 135, (2002)
Tez: Karbon Fiber Takviyeli Poly(Ether Ether Ketone) Kompozitin Tribolojik Özellikleri.
0-
44) "Modification of polyolefins with silicone copolymers. II. Thermal, mechanical, and tribological behavior of PP and HDPE blended with silicone copolymers", Yilgor, E., Sinmazcelik, T., Iskender Yilgor, Journal of Applied Polymer Science, 84, 535-540, (2002)
Tez:
5-
45) "Determination of chemical corrosion effects by using instrumented impact testing on Polyphenylenesulphide (PPS) composites", Sınmazçelik, T., Arıcı, A., Journal of Materials Science Letters , 21, 1809-1811, (2002)
Tez:
2-
46) "Carbon-fiber-reinforced PEEK composites: Role of thermal history on the crystallinity, morphology, and thermomechanical properties", Sinmazcelik, T., Yilgor, E., Yilgor, I., ABSTR PAP AM CHEM S , 218, 177, (1999)
Tez: Karbon Fiber Takviyeli Poly(Ether Ether Ketone) Kompozitin Tribolojik Özellikleri.
0-
47) "Modification of polyolefins with silicone copolymers in a twin-screw extruder: Processing,bulk and surface properties", Yilgor, E., Yilgor, I., Sinmazcelik, T, ABSTR PAP AM CHEM , 215, 369, (1998)
Tez:
0-
48) "Influence of sample preparation method on surface microstructure and properties of nylon-6 siloxane-urea copolymer blends", Yilgor, E., Yilgor, I., Sinmazcelik, T., ABSTR PAP AM CHEM, 216, 527, (1998)
Tez:
0-
49) "Microstructure and tribological behavior of CF/PEEK composites: effect of thermal history on matrix and surface morphologies", Sinmazcelik, T., Curgul, I., Yilgor, E., Yilgor, I., ABSTR PAP AM CHEM , 216, 542, (1998)
Tez:
0-